DICOM Viewer Tool
A pure front-end local DICOM medical image viewer with MPR multi-planar reconstruction (linked axial, sagittal and coronal crosshairs), complete image information, window/level adjustment, automatic series grouping with thumbnails — all processed locally in your browser.
Select DICOM Folder
Click to select folder or drag DICOM files here
Supports .dcm, .dicom, .ima formats
Select a DICOM folder to start viewing
About This Tool
DICOM Viewer is a browser-based medical image viewer for local DICOM studies. It groups files into series with thumbnails, renders slices with window/level presets, and builds MPR multi-planar reconstructions with linked axial, sagittal and coronal crosshairs — with no installation and no file upload.
It is intended for medical education, research and image review only, not for clinical diagnosis. Radiologists, clinical researchers and imaging developers use it to study teaching cases, verify acquisition parameters and check that an exported study still renders correctly.
Features
MPR Multi-Planar Reconstruction
Stacks consecutive slices into a 3D volume in real time and reconstructs axial, sagittal and coronal planes in one click — no professional imaging software required
Linked Three-Plane Crosshairs
Crosshairs across the three planes stay in sync; click or drag any plane to jump to the same anatomical position, ideal for examining structures from multiple angles
Complete Image Information
Inspect patient and study data, image size, bit depth, pixel spacing, MR or CT parameters, manufacturer and transfer syntax — all the key DICOM tags in one place
Window/Level Presets
Built-in CT presets for lung, bone, soft tissue, abdomen, brain and liver, with manual drag adjustment for fine tuning
Automatic Series Grouping
Automatically recognizes and groups different series in a folder and renders preview thumbnails for clear, organized switching
Local & Private
All DICOM files are parsed and rendered only in your local browser memory, never uploaded to a server; data is released when the page closes
Use Cases
Teaching & Case Discussion
Open a folder of teaching cases, switch series through thumbnails, and use MPR to explain anatomy across three planes during a discussion.
Protocol & Parameter Review
Inspect MR TR/TE or CT kVp/mA, pixel spacing and slice thickness to confirm that a study was acquired with the expected protocol.
Export Quality Checking
Verify that a converted or de-identified study still opens and renders correctly before delivering it to a colleague or an archive.
Imaging Software Validation
Check that DICOM files produced by your own exporter can be parsed and displayed, and compare the rendering with reference slices.
What Is MPR (Multi-Planar Reconstruction)?
MPR (Multi-Planar Reconstruction) stacks a series of consecutively scanned 2D slices into a 3D volume, then re-slices it along different directions to produce new cross-sectional images. The direction in which the scanner originally acquired the images is called the “acquisition plane”; this tool detects it automatically and labels it in the interface.
When MPR is enabled, a 2×2 grid simultaneously displays the axial, sagittal and coronal planes plus an image information panel: left-drag moves the crosshairs, right-drag adjusts window/level, and the wheel or slider switches slices, with all three planes always linked. If the current series contains single-plane data only, planes other than the acquisition direction may be limited by insufficient data.
What’s Included in the Image Information
Click the “Image Information” button below the viewing area to see the full technical parameters of the current image, organized into the following five sections.
Patient & Study
Patient name and ID, sex, age, study date, study description, series number, image count, slice thickness, and unique identifiers such as StudyInstanceUID and SeriesInstanceUID
Image Parameters
Instance number, image size, bits allocated, pixel spacing, spacing between slices, and current window width/level
MR Parameters (MR images only)
TR, TE, TI, flip angle, scanning sequence and sequence name to help identify the image weighting
CT Parameters (CT images only)
Tube voltage (kVp), tube current (mA), convolution kernel and other exposure/reconstruction parameters
Device & Encoding
Institution, manufacturer, station name, DICOM transfer syntax and compression method
How to Use
- 1Click the upload area to select a folder containing DICOM files, or drag DICOM files into it. Files are parsed locally and never uploaded
- 2Choose a series from the list on the left; once loaded, use window presets, zoom and pan to inspect the images
- 3Check “MPR” in the toolbar and wait for the 3D volume to build. With many slices this may take a few seconds and use significant browser memory
- 4Use the crosshairs, sliders and wheel in the 2×2 grid to explore axial, sagittal and coronal planes in sync
- 5Click “Image Information” to review patient data, imaging parameters, MR/CT parameters and device encoding
FAQ
What is MPR, and how is it different from ordinary image viewing?
Ordinary viewing only lets you scroll through slices in the scanner’s original acquisition direction. MPR first reconstructs the slices into a 3D volume, then re-slices it into axial, sagittal and coronal planes with linked crosshairs, so you can understand the spatial relationships of anatomy from multiple angles.
Which DICOM images support MPR?
A series must contain multiple consecutive slices scanned in the same direction with position information, typically CT and MR tomographic series. A single image or a series lacking position information cannot be reconstructed; with single-plane data only, planes outside the acquisition direction will be limited.
What can I see in the image information?
Image information is organized into Patient & Study, Image Parameters, MR Parameters, CT Parameters, and Device & Encoding — patient name and ID, study date, image size and bit depth, pixel spacing, TR/TE or kVp/mA, manufacturer and transfer syntax, among other DICOM tags.
Does enabling MPR upload my images?
No. This is a pure front-end tool: DICOM files are parsed and reconstructed solely in your local browser memory and are never uploaded to a server at any point. The data is released when you close the page.
Why does my browser slow down or warn about memory after enabling MPR?
MPR loads every slice into memory to build the 3D volume, so memory usage grows with slice count. To keep the browser stable, a confirmation appears for series with more than 600 slices. If you experience lag, disable MPR or load fewer images at a time.
About This Tool
DICOM Viewer is a browser-based medical image viewer for local DICOM studies. It groups files into series with thumbnails, renders slices with window/level presets, and builds MPR multi-planar reconstructions with linked axial, sagittal and coronal crosshairs — with no installation and no file upload.
It is intended for medical education, research and image review only, not for clinical diagnosis. Radiologists, clinical researchers and imaging developers use it to study teaching cases, verify acquisition parameters and check that an exported study still renders correctly.
MPR (Multi-Planar Reconstruction) stacks a series of consecutively scanned 2D slices into a 3D volume, then re-slices it along different directions to produce new cross-sectional images. The direction in which the scanner originally acquired the images is called the “acquisition plane”; this tool detects it automatically and labels it in the interface.
When MPR is enabled, a 2×2 grid simultaneously displays the axial, sagittal and coronal planes plus an image information panel: left-drag moves the crosshairs, right-drag adjusts window/level, and the wheel or slider switches slices, with all three planes always linked. If the current series contains single-plane data only, planes other than the acquisition direction may be limited by insufficient data.
Key Features
MPR Multi-Planar Reconstruction
Stacks consecutive slices into a 3D volume in real time and reconstructs axial, sagittal and coronal planes in one click — no professional imaging software required
Linked Three-Plane Crosshairs
Crosshairs across the three planes stay in sync; click or drag any plane to jump to the same anatomical position, ideal for examining structures from multiple angles
Complete Image Information
Inspect patient and study data, image size, bit depth, pixel spacing, MR or CT parameters, manufacturer and transfer syntax — all the key DICOM tags in one place
Window/Level Presets
Built-in CT presets for lung, bone, soft tissue, abdomen, brain and liver, with manual drag adjustment for fine tuning
Automatic Series Grouping
Automatically recognizes and groups different series in a folder and renders preview thumbnails for clear, organized switching
Local & Private
All DICOM files are parsed and rendered only in your local browser memory, never uploaded to a server; data is released when the page closes
When to Use It
Teaching & Case Discussion
Open a folder of teaching cases, switch series through thumbnails, and use MPR to explain anatomy across three planes during a discussion.
Protocol & Parameter Review
Inspect MR TR/TE or CT kVp/mA, pixel spacing and slice thickness to confirm that a study was acquired with the expected protocol.
Export Quality Checking
Verify that a converted or de-identified study still opens and renders correctly before delivering it to a colleague or an archive.
Imaging Software Validation
Check that DICOM files produced by your own exporter can be parsed and displayed, and compare the rendering with reference slices.
How to Use It
- 1Click the upload area to select a folder containing DICOM files, or drag DICOM files into it. Files are parsed locally and never uploaded
- 2Choose a series from the list on the left; once loaded, use window presets, zoom and pan to inspect the images
- 3Check “MPR” in the toolbar and wait for the 3D volume to build. With many slices this may take a few seconds and use significant browser memory
- 4Use the crosshairs, sliders and wheel in the 2×2 grid to explore axial, sagittal and coronal planes in sync
- 5Click “Image Information” to review patient data, imaging parameters, MR/CT parameters and device encoding
Frequently Asked Questions
What is MPR, and how is it different from ordinary image viewing?
Ordinary viewing only lets you scroll through slices in the scanner’s original acquisition direction. MPR first reconstructs the slices into a 3D volume, then re-slices it into axial, sagittal and coronal planes with linked crosshairs, so you can understand the spatial relationships of anatomy from multiple angles.
Which DICOM images support MPR?
A series must contain multiple consecutive slices scanned in the same direction with position information, typically CT and MR tomographic series. A single image or a series lacking position information cannot be reconstructed; with single-plane data only, planes outside the acquisition direction will be limited.
What can I see in the image information?
Image information is organized into Patient & Study, Image Parameters, MR Parameters, CT Parameters, and Device & Encoding — patient name and ID, study date, image size and bit depth, pixel spacing, TR/TE or kVp/mA, manufacturer and transfer syntax, among other DICOM tags.
Does enabling MPR upload my images?
No. This is a pure front-end tool: DICOM files are parsed and reconstructed solely in your local browser memory and are never uploaded to a server at any point. The data is released when you close the page.
Why does my browser slow down or warn about memory after enabling MPR?
MPR loads every slice into memory to build the 3D volume, so memory usage grows with slice count. To keep the browser stable, a confirmation appears for series with more than 600 slices. If you experience lag, disable MPR or load fewer images at a time.
