IP Address Calculator Tool
Free online IP address toolkit with subnet mask calculation, CIDR calculation, subnetting, route aggregation, IPv4/IPv6 conversion and batch IP parsing. All calculations run locally in your browser and no data is uploaded.
About This Tool
IP Address Toolkit combines subnet calculation, CIDR analysis, subnetting, route aggregation, IPv4 and IPv6 conversion and batch parsing into one page. Enter an address with a prefix and immediately see the network, broadcast, usable range and host count.
It is built for network engineers, backend developers and anyone configuring firewalls or cloud networks. All calculations run locally, so internal addressing plans are never uploaded.
Key Features
Subnet Calculator
Compute network address, broadcast, usable range, netmask, wildcard and host count.
CIDR Membership Check
Verify whether a specific address belongs to a subnet before writing an access rule.
Subnetting
Split a network by subnet count or by required hosts per subnet.
IPv4 and IPv6 Conversion
Convert mapped addresses, 6to4 forms and compressed or expanded IPv6 notation.
Batch Parsing
Parse many addresses or CIDR blocks at once and export the results as CSV.
When to Use It
Firewall and ACL Planning
Confirm which addresses a CIDR block actually covers before granting access.
Cloud Network Design
Divide a VPC range into subnets sized for the workloads they will host.
Log Triage
Identify whether a suspicious address falls inside your own network ranges.
How to Use It
- 1Enter an IP address and prefix length in the subnet calculator.
- 2Review the network, broadcast, range and host information.
- 3Use the subnetting panel to split the network if needed.
- 4Copy the results or export batch parsing output as CSV.
Frequently Asked Questions
How many usable hosts does a prefix provide?
For IPv4, the host count is two to the power of the host bits minus two, excluding the network and broadcast addresses.
What is the difference between a netmask and a wildcard mask?
A netmask marks network bits with ones, while a wildcard mask inverts that pattern and is used by ACLs and routing protocols.
Does it support IPv6 subnets?
IPv6 conversion and parsing are supported. Very large IPv6 ranges cannot be enumerated host by host.
Is my address plan uploaded?
No. All calculations happen in your browser.
